AURA PRO Engine Bay LED Lighting Kit ( 4 x 12-Inch or 4 x 24-Inch) - Bluetooth Enabled APP Full Color Spectrum

$89.99 $65.99 Sale
Shipping calculated at checkout.
AURAPRO-INTERIOR-ENGINE-BAY-KIT
Size
 

OPT7 FAST & FREE SHIPPING

AURA PRO 12" LED Strips

Bluetooth ONLY
AURA PRO™ 12" Engine Bay LED Light Kit Includes: 
  • 1 x AURA PRO™ Bluetooth Control Box
  • 2 x Y Splitters
  • 4 x 12" LED Strips with Adhesive Back
  • 4 x 10 ft Extension Wires
  • 1 x 10 ft Hardwire In-line Fuse Power Harness
  • 1 x Pack of Mounting Kit and Zip Ties
AURA PRO 24" LED Strips

Bluetooth ONLY
AURA PRO™ 24" Engine Bay LED Light Kit Includes: 
  • 1 x AURA PRO™ Bluetooth Control Box
  • 2 x Y Splitters
  • 4 x 24" LED Strips with Adhesive Back
  • 4 x 10 ft Extension Wires
  • 1 x 10 ft Hardwire In-line Fuse Power Harness
  • 1 x Pack of Mounting Kit and Zip Ties

Fire Up Your Engine Bay With LED Lights. 
Get ready for a show-stopping entrance at the next car meet! Prepare yourself for a never-ending stream of inquiries like, "Where did you get those?"
Introducing our customization SmartColor LED Engine Bay kit, designed to elevate your ride to a whole new level of attention-commanding style.

1 Way to Run the Show.
Choose from the ALL NEW AURA PRO™ LED Bluetooth App Enabled Phone Controller. (iOS & Android Compatible)

Fire Up Your Engine Bay With LED Lights.
Get ready for a show-stopping entrance at the next car meet! Prepare yourself for a never-ending stream of inquiries like, "Where did you get those?"
Introducing our customization SmartColor LED Engine Bay kit, designed to elevate your ride to a whole new level of attention-commanding style.

Your Color, Your Way. 

Roll with any theme you want. Whether it's to match your rims or rep your favorite sports team's colors, the choice is yours with 16 different custom colors at the push of a button.

Brightness On Demand.
Whether you want daytime bright or something more subtle, discover your ideal hue with our included dimmer. 4 feet/8 feet worth of SmartColor™ LED strips make your ride glow like never before.

Built Tough. Built for the Road.
AURA LED Strips are built to last. Constructed and filled with dense silicone. Our kits are designed to protect against road debris, moisture and anything life can throw at it.

IMPORTANT: The LED connectors are not waterproof. You will need to use a heat shrink tube or electrical tape around the LED connectors to ensure the longevity of the lighting kit.

SoundSync™ Knows How to Party. 
SoundSync™ Music Mode gives your ride undeniable rhythm. Sound activated colors flash along with the bass, taking your party to new heights. 

Protected in all 4 Seasons. 
AURA Engine Bay Kits are built to last and shine through all types of weather thanks to IP67 rated silicone. Also comes with complete 1-Year OPT7 Warranty.

AURA PRO™ Bluetooth Modes:

  • Color Adjustable on Solid Mode
  • Color Adjustable on Door Assist (lights up when you open the door on the vehicle)
  • Pulse Mode
  • Strobe Mode
  • Cycle Mode
  • Soundsync™ Mode

- Ability to control up to 4 AURA™ LED Kits at once 
- App is downloadable for iOS and Android users
- The AURA PRO™ App was built, designed, and developed by our team and we keep the APP updated with the newest features

IMPORTANT NOTICE: This product is intended to be connected as is, you may add our expansion kits; however, it should not exceed more than 1 AURA kit + 1 AURA Single Row Expansion kit.

Automotive Adhesive Tape
Our premium strip kits use strong binding tape for a lasting hold you can trust.

Tip on applying adhesive LED strips securely:
1. To prep the area you wish to mount the LED Strip. Wash the installation point with warm water, then wipe it dry.
2. Dampen a clean cloth in warm water, then scrub the surface to remove debris. Any grime left behind could prevent the LEDs from sticking, so thoroughly clean the surface until it's free of dirt and scuff marks.
3. Remove any moisture left over with a clean, dry cloth or give the surface 30 minutes to air dry. Next, use the adhesive booster that we provide to wipe the area for a ready to stick surface.
4. Peel the adhesive backing off and press the LEDs in place. LED lights are like stickers, so wait until you're ready to put them on the wall before pulling the backing off. It's best to do this a little at a time. Start at one end of the surface, peeling the backing off of the initial LED light. Position it, press it flat by hand, then continue placing the rest of the strip. Take your time. Make sure the LEDs are in the right place so you don't have to move them later.

Warranty Covered:
Includes our free 1 Year Warranty (starting from the order date)

Installation Guide
 AURA PRO Engine Bay LED Installation Guide - HERE

CA Residents:  WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov