AURA PRO |

Bluetooth ONLY
|
AURA™ PRO Mustang Halo LED Light Kit Includes:
- 1 x AURA PRO™ Bluetooth Control Box
- 2 x Y Splitters
- 4 x 12" LED Strips with Adhesive Back
- 4 x 10ft Extension Wires
- 1 x 10 ft Hardwire In-line Fuse Power Harness
- 1 x Pack of Mounting Kit and Zip Ties
|
OPT7's award winning AURA PRO Bluetooth LED Lighting Kit has brought a custom innovation for your 2005-2014 Ford Mustang. If you are looking to have a pop of color in the Halo DRL angel eye rings, this is the product for you. Easy to install and easy on your wallet for a standout DIY mod. Checkout the installation video on YouTube, video link below.
Full Bluetooth Capability
Control up to 3 other AURA Kits to pair with your Mustang Halo Rings.
These kits DO NOT require a disassembly of your OEM housing for easy Plug & Play.
-2 extra strips provided as a back up or provide extra brightness to your halos.
1 Way to Run the Show.
Choose from the ALL NEW AURA PRO™ LED Bluetooth App Enabled Phone Controller. (iOS & Android Compatible)
Features of AURA PRO™ Bluetooth Ford Mustang 2005-2014
- AURA™ Our all New AURA PRO Bluetooth Enabled APP
- Control up to 4 AURA Bluetooth Kits at the same time
- 2x the distance than any other Bluetooth on the market
- Connectivity pass through chipset, don't let where you install the control box affect your connectivity like other kits out there
- App updates allow for future feature enhancements that generic kits can't provide
- Multiple Flash/Beat/Flow Modes
- Endless color selection
- Bluetooth App Enabled Phone Controller. (iOS & Andrioid Compatible)
- Kits come with a seperate mountable On/Off switch
OPT7 Connect APP:
Proprietary Scalable Technology!
Our custom build means we've got a ton of features down the road that you will benefit from as far as update the app and our control box has been engineered to handle that ahead of time.
- Presets: Save up to 3 favorite colors on Solid, Strobe, Color Fade modes
- Endless color selections
- Brightness dimming selections
- On the OPT7 Connect APP, our modes are: Solid, Strobe, Color-Fade, Cycle
- Ability to control up to 4 AURA™ LED Kits at once
- App is downloadable for iOS and Android users
- The AURA PRO™ App was built, designed, and developed by our team and we keep the APP updated with the newest features
Safe & Neat Installation
Inline fuse power harness which allows you to use the battery direct connection. This allows a direct battery and a protected power pull so you don't need to worry about an overdrawn on voltage. Safe & neatly done supported!
NEED MORE LENGTH for customized installation? Search:
Automotive Adhesive Tape
Our premium strip kits use strong binding tape for a lasting hold you can trust.
Tip on applying adhesive LED strips securely:
1. To prep the area you wish to mount the LED Strip. Wash the installation point with warm water, then wipe it dry.
2. Dampen a clean cloth in warm water, then scrub the surface to remove debris. Any grime left behind could prevent the LEDs from sticking, so thoroughly clean the surface until it's free of dirt and scuff marks.
3. Remove any moisture left over with a clean, dry cloth or give the surface 30 minutes to air dry. Next, use the adhesive booster that we provide to wipe the area for a ready to stick surface.
4. Peel the adhesive backing off and press the LEDs in place. LED lights are like stickers, so wait until you're ready to put them on the wall before pulling the backing off. It's best to do this a little at a time. Start at one end of the surface, peeling the backing off of the initial LED light. Position it, press it flat by hand, then continue placing the rest of the strip. Take your time. Make sure the LEDs are in the right place so you don't have to move them later.
Warranty Covered:
Includes our free 1 Year Warranty (starting from the order date)
Installation Guide
AURA PRO Mustang Halo Ring (In-line Fuse Only) Guide - HERE
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|