FluxBeam X LED Headlights
LED Lighting Enhanced by a Factor of X.
The next generation of LED lighting is here. Experience true lighting intensity with the newly created FluxBeam® X.
Cooler Operating Temperatures = Brighter Bulbs
Maximum output requires maximum cooling. FluxBeam X has been designed with efficient thermal conductivity in mind. A redesigned heat sink, better components, and a boosted TurboCool fan gives you a bulb that is 34% cooler and in turn increases reliability by 20%.
Power to See Everything
With its cooler design, FluxBeam X is 20% more powerful than the previous generation FluxBeam. Generating a max output of 4,209 lumens per bulb @ a crystal clear 6000K Daytime White. Experience light over 6x more intense than standard halogen.
The Arc Beam™ Advantage
Power needs control. Since most headlights are made for low output halogen bulbs, this hi-output LED needs to be carefully projected for a clear and even beam pattern. The precision cut and shaped Arc-Beam lens focuses raw lumens for a clearer beam pattern and further light projection.
50,000 Hours of Intense Light
The newly designed dual driver system safely powers the LED and the fan for a more reliable 50,000 hour lifespan.
Installing is easy. FluxBeams are sized to OEM bulb size standards and use the same style of plugs and connections as OEM bulbs. In addition, FluxBeam includes built-in components that eliminate flicker and “Error-out” warning lights commonly associated with aftermarket lighting.
- Two FluxBeam X LED Bulbs.
- Two RedLine LED Drivers.
- Two ECM Capacitors.
- Two Polarity Flip Adapters.
- Installation Manual.
- Color Temperature: 6000K Daytime White.
- LED Type: CREE MK-R.
- Lumens Per Bulb: 4,209 Lumens.
- Wattage Per Bulb: 30w.
- Voltage: 8-32v.
- Fan Type: Dual 10,000 RPM TurboCool fan.
- Certifications: IP67 Waterproof, RoHS.
- Build Material: Cold-Pressed Aluminum.
- Recommended for Projector Headlights: Yes.
See what it takes to install FluxBeam X with our helpful installation guide.
Do You Have a 2007+ Chrysler, Dodge or Jeep?
Make sure to add our TIPM Stabilizing Resistor if you own a TIPM-enabled vehicle! Most 2007 and newer Chryslers, Dodges, and Jeeps have a TIPM computer system and will require this resistor. If you are unsure of what you need, please feel free to reach out to our knowledgeable Customer Support at firstname.lastname@example.org – or use our Live Chat!
This video will teach you how to install the OPT7 FluxBeam X LED Headlight Conversion Kit. (http://www.opt-7.com/fluxbeam-x-led-headlights/) Step one: Get your vehicles manual and check how to access your headlight housing. Step two: Assemble your FluxBeam conversion kit. Let’s get your LED bulbs ready to install by connecting the LED Driver to the LED bulbs, then connect the Flux Capacitor to the LED Driver. Next you will need to connect the plug and play adapter to the Flux Capacitor. You can now pull off the protective caps on the LED bulbs. Step three: Remove your OEM bulb. You will need to access the back of your headlight housings. We removed the headlight housing to make it easier to show you how to do the install. This will likely not be necessary but that really depends on your specific year, make and model of your car or truck. Step four: Disconnect and remove your existing headlight bulbs from your headlight housing. Step five: Insert the FluxBeam LED headlights, secure the bulbs into the headlight housing. Step six: Properly secure all FluxBeam wiring. Ensure the FluxBeam led bulb has proper airflow. Now you will want to make sure you can fit all of the wiring within the headlight housing. Then you will seal it up. Step seven: Plug in the FluxBeam LED headlights to your vehicle power harness. Now for the fun part, let’s test the lights to make sure everything was connected properly. If the lights turn on properly, then you will just have one last step left. This is one of the most important steps. You will want to adjust the headlights to make sure they are aimed correctly. We highly recommend taking your vehicle to a shop so that they can be properly calibrated.
FluxBeam X LED...This video will teach you how to install the OPT7 FluxBeam X L...